EasyManua.ls Logo

Aerogen Pro - Recharging the Battery

Aerogen Pro
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Aerogen
®
Control / Indicator Function
15 Min. Indicator
• Green (steadily lit) = 15 Minute
nebulization cycle on
• Green (flashing) = Low battery power
• Nebulizer automatically powers off after
15 minutes have elapsed
30 Min. Indicator
• Green (steadily lit) = 30 Minute
nebulization cycle on
• Green (flashing) = Low battery power
• Nebulizer automatically powers off after
30 minutes have elapsed
Error Indicator • Amber = Faulty electrical connection
On/Off Power Button
• To operate in 15 Minute Mode, press and
immediately release the On/Off button
• To operate in 30 Minute Mode, press
and hold the On/Off button for at least 3
seconds from off
• Pressing during nebulization turns off
power to the nebulizer
Battery Status Indicator
• Green = Battery fully charged
• Amber = Battery charging
• No light = Battery in operation
Recharging the Battery
To recharge the battery, connect the AC/DC Adapter to the controller and
connect to AC power source. The battery status indicator is amber while
charging and green when fully charged.
If the controller is placed in long-term storage, it is recommended that the
battery be recharged every 3 months.
Allow a minimum of four hours for the internal battery to fully recharge.
Table 1. Aerogen Pro Controls & Indicators

Related product manuals