Aerogen Pro - Page 8

6
Aerogen
®
Inspect all parts before use, and do not use if any parts are missing,
cracked or damaged. In case of missing parts, malfunction or damage,
contact your sales representative.
Do not immerse or autoclave the controller or AC/DC adapter.
Disassemble all parts before autoclaving.
Use only with components specified by Aerogen.
Do not use or store outside of specified environmental conditions.
To avoid mechanical or electrical damage, do not drop the nebulizer or
the controller.
Do not use in the presence of devices generating high electromagnetic
fields such as magnetic resonance imaging (MRI) equipment.
The Aerogen Pro controller contains a nickel metal hydride (NiMH)
rechargeable battery, which should be disposed of in accordance with
local governing restrictions at the end of its useful life.
To avoid damage to the nebulizer:
• Prior to use, autoclave according to specified directions and
temperature given in the Cleaning, Disinfection and Sterilization
section of this Instruction Manual only. Any deviation from directions
given in this Instruction Manual may cause damage to the nebulizer
and render it inoperable.
• Do not apply undue pressure to the domed aperture plate in the center
of the nebulizer.
• Do not push out the Aerogen Vibronic
®
aerosol generator.
• Do not use a syringe with a needle to add medication.
• Do not use abrasive or sharp tools to clean the nebulizer.