Why is the 30 Min. indicator flashing on my Aerogen Solo?
If the 30 Min. indicator flashes during nebulization with your Aerogen Respiratory Product, it means the battery power is low. You should recharge the battery.
What does it mean if the fault indicator light illuminates on Aerogen Solo?
If the fault indicator light illuminates on your Aerogen Respiratory Product, verify that the controller cable is correctly connected to both the nebulizer and the controller. The controller cable may be incorrectly connected to the nebulizer, or electronics are malfunctioning.
Provides critical safety instructions and precautions for operating the Aerogen Solo System.
Lists compatible volatile anesthetic agents and their maximum exposure conditions.
Step-by-step guide for connecting the Aerogen Solo nebulizer and controller.
Explains how to connect the nebulizer to adult and pediatric breathing circuits using T-pieces.
Describes placing the nebulizer on the dry side of a humidifier or between the wye and ET tube.
Guidelines for using the nebulizer with Heat and Moisture Exchangers (HME) and performing leak tests.
General| Brand | Aerogen |
|---|---|
| Model | Solo |
| Category | Respiratory Product |
| Language | English |
To Next Page
