6. Powerplant
Propeller - attachment, leading edge blade state, check for nicks and security,
check spinner for cracks and attachment.
Engine - check for any operating fluids leaks below
engine cowlings
- state of the cowlings
- state of the exhaust system attachment
- state of the engine attachment into the rubber
engine mants.
- check coolant level and oil level
- turn the propeller by hand several times for odd
noises or excessive resistance and normal
compression.
WARNING
Before cranking the propeller switch off both ignition circuits. The
propeller must be caught at the blade surface every time. Do not catch
at the edge.
WT-9 Dynamic Club S FLIGHT MANUAL Section 4 Page 4-
Date: 1.12.2001 „Appr“
To Next Page
Loading...
