AES global CellCOM PRIME - Surge and Multibutton PCB Overviews

P a g e | 19
Overview of Surge PCB (4)
*optional extra
Overview of Multibutton PCB (3)
*Multibutton Systems Only
Earth Rod MUST be connected for
warranty.
Power Output
NOT USED
24v INPUT – Use provided power supply or hook up to
24v solar system. (DO NOT USE 12v HERE)
12v DC – Battery backup
1 Amp Quick Blow Input Fuse (REPLACEABLE)
Must use a 30 Watt solar panel (minimum) and at least 2 x 10Ah
batteries to supply a regulated 24v
12V | 24 IN | SOL | OUT
Note: Connections will be pre-wired.
Button Power &
Connection Cable
10-Way
Connection Cable
Direct Cable Connectors
(NOT USED)
Button 1 Button 2
Button 3
Button 4
C
C
C
C
+
-
= COMMON = COMMON