III
Safety Information
Important Safety Information
WARNING! Use of controls or adjustments other than those specied herein may
result in hazardous radiation exposure.
The CSS1-MM light source is a CLASS I LED PRODUCT.
The CSS1-SM light source is a CLASS I LASER PRODUCT.
CAUTION! To avoid serious eye injury, never look directly into the optical outputs of
ber optic network equipment, test equipment, patch cords, or test jumpers. Always
assume that optical outputs are on.
NOTICE! NOYES power meters and light sources contain no user serviceable parts.
Except for changing batteries and cleaning optical ports, these units must be returned
to NOYES or authorized agents for repair and calibration.
IMPORTANT! Proper care in handling should be taken when using any precision
optical test equipment. Scratched or contaminated optical connectors can impact the
performance of the instrument. It is important to keep the dust caps in place when the
unit is not being used.
!
!
!
!
To Next Page
Loading...
Need help?
General
