Afore On-Grid - 4.3.4 Power Quality Response Mode Setting

Y1: 1.00 Y2: 0.95i
Y3: 0.95i Y4: 0.95i
UP/DOWN Set reactive power percentage
Press ENT to confirm
X1: 50 X2: 100
X3: 100 X4: 100
PQ Set
1
UP/DOWN Select 1
ENT
UP/DOWN Set grid voltage percentage
Press ENT to confirm
4.3.4 Power Quality Response Mode Setting
a. Active Power Control Power Factor
4.3.4.1 Enable Power Quality Response Modes
UP/DOWN Select Q (Var) Mode
Normal
Power=xxW
Setting
PtoGrid
ENT
ENT
ENT
Q(Var)Mode
10min OVR
PassWord
xxxx
UP/DOWN
Password: 6231
X1
Y1
X2 X3 X4
Y2 Y3 Y4
UP/DOWN Select Setting
Power Quality Response Modes can be enabled via the LCD menu. Refer to
section 4.3.4.1 (a)~(d) of this manual.
ENT
ENT
When PQ Set is 1, Power Quality
Response Mode is enabled
Operation
33
Note: