Afore On-Grid - Disable Power Quality Response Modes

PQ Set
0
UP/DOWN Select 0
UP/DOWN Select Setting
UP/DOWN Select
Q (Var) Mode
Normal
Power=xxW
Setting
PtoGrid
ENT
ENT
ENT
Q(Var)Mode
10min OVR
PassWord
xxxx
ENT
UP/DOWN
Password: 6231
UP/DOWN Select Setting
4.3.4.2 Disable Power Quality Response Modes
4.3.4.3 Active Power Mode Set
a. Active Power Percentage
100%
UP/DOWN Select Output P%
Normal
Power=xxW
Setting
PtoGrid
ENT
ENT
Output P%
Freq Range
PassWord
xxxx
UP/DOWN Set power percentage
Press ENT to confirm
ENT
ENT
UP/DOWN
Password: 6231
Power Quality Response Modes can be disabled
via the LCD menu. Refer to section 4.3.4.2 of this manual.
When PQ Set is 0, Power Quality
Response Modes is disabled.
Operation
36
Note: