b. Volt-Watt
Operation
37
The volt–watt response mode shall be enabled by default.
To turn off the volt-watt response mode, change the 12th digit to 0.
Note:
UP/DOWN Select HNSxxTL
Normal
Power=xxW
Inverter Info
Wifi Info
HNSxxTL
Version：M Vxxx
ENT
Press the ENT continuously to
select the 12th digit
UP/DOWN
Select Protect
ENT
UP/DOWN Select Inverter Info
ENT
Press UP+ENT
at the same time
Protect
Mainchine Type
1110 0010 0000 0000
Press UP/DOWN to select 0,
press ENT to confirm and exit
1110 0010 0001 0000
To Next Page
Loading...
