EasyManua.ls Logo

AG-EXPRESS ELECTRONICS SFA-32 - Post Season Storage; Harness Pinouts

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATOR’S MANUAL
21
SFA-32
Post Season Storage for the Ag Express Precision Flow Meters
Within 2 to 3 days of finishing for the season we strongly recommend a total cleansing
of the system with water. You will need to clean and rinse the fertilizer residue out of the
system adequately so it will not cause issues on start up for the next season. The more
thorough job you do now will pay you dividends as the amount of fertilizer left in system
will cause potential sources for blockages next time the system is used.
Once you have rinsed the system clean you will need to winterize your system. It is
recommended that a good quality RV antifreeze rated to - 50 is utilized so that freezing
will not occur and cause major damage and avoidable expense to your system
components.
Simply run enough RV Antifreeze through your system to replace the water that was
used to rinse your system. Be extra conscientious to FLUSH any area that may trap the
water (low spots etc). Make sure you use enough RV Antifreeze to completely fill your
system components with the antifreeze.
18 Pin Console Pinout
SFA-32 Console Connector
Pin #
Description
A1
Row 25 (orange/green)
A2
Row 26 (black/wh/red)
A3
Row 27 (green/bk/white)
B1
Row 28 (orange/bk/white)
B2
Row 29 (blue/bk/white)
B3
Row 30 (black/red/green)
C1
Row 31 (white/red/green)
C2
Row 32 (red/black/green)
C3
RPM 1 (brown)
D1
RPM 2 (blue)
D2
RPM 3 (orange)
D3
Vac 1 (yellow)
E1
Hopper Level 1 Signal (green)
(((white/red/green)
E2
Hopper Level 2 Signal (white)
((red/black/green)
E3 - F1
No Connection
F2
8 V Sensor Power (red)
F3
8 V Sensor Power (black)