What to do if my AG Neovo Monitor says 'NO SIGNAL INPUT'?
If your AG Neovo Monitor displays 'NO SIGNAL INPUT', it means the monitor isn't detecting a signal from any input ports. To resolve this: * Ensure your PC or video source is powered ON. * Verify the signal cable is securely connected. * Inspect the connector for any twisted or broken pins.
Why is there no display on my AG Neovo Monitor but the power LED is amber?
If your AG Neovo Monitor's power LED is amber but there's no display, the issue might be related to your PC's state or the cable connection. Here's what you can do: * Check if your PC is in standby mode. If so, move the mouse or press any key to wake it up. * Make sure your PC or video source is turned ON. * Ensure the signal cable is properly connected.
What to do if my AG Neovo E-17 Monitor shows 'NO VIDEO SIGNAL FROM ANALOG INPUT'?
If your AG Neovo Monitor displays 'NO VIDEO SIGNAL FROM ANALOG INPUT', it indicates that no signal is being detected from the ANALOG port. To fix this: * Confirm that your PC is turned ON. * Ensure the D-Sub 15-pin cable is securely connected to the ANALOG port on the back of your LCD display. * Verify the D-Sub 15-pin cable is properly connected to your PC. * Check the D-Sub 15-pin cable connector for any bent or broken pins.
What to do if my AG Neovo E-17 Monitor says 'NO VIDEO SIGNAL FROM DIGITAL INPUT'?
If your AG Neovo Monitor displays 'NO VIDEO SIGNAL FROM DIGITAL INPUT', it signifies that no signal is being detected from the DIGITAL port. To troubleshoot this: * Ensure your PC is powered ON. * Verify the DVI cable is correctly connected to the DIGITAL port on the back of your LCD display. * Confirm the DVI cable is securely connected to your PC. * Inspect the DVI cable for any bent or broken pins.
How to fix an AG Neovo Monitor with no display and the power LED off?
If your AG Neovo Monitor has no display and the power LED is off, follow these steps: 1. Verify that your LCD display is turned ON. 2. Check if the adapter is correctly connected to your LCD display. 3. Ensure the power cord is properly connected to the adapter. 4. Confirm the power cord is securely connected to a power source. 5. Test the power source with another device to ensure it functions correctly.
How to fix blurred text on my AG Neovo Monitor?
If the text display on your AG Neovo Monitor appears blurred, here are some steps to take: * Check if the resolution is set to 1280x1024. * Press the button to enable auto adjust. * Adjust the Clock and Phase in the OSD Display Adjust menu. * If the resolution is not at 1280x1024, adjust the Sharpness from the OSD menu.
What to do if my AG Neovo Monitor has no center screen and missing lines?
To center the screen and correct missing lines on your AG Neovo Monitor: * Press the button to enable auto adjust. * Adjust the H-Position and V-Position settings.
Why does my AG Neovo E-17 have red, green, blue, or black spots on the screen?
Red, green, blue, or black spots on the screen of your AG Neovo Monitor are due to damaged micro transistors on the TFT LCD display. A very small number of damaged transistors is accepted during manufacturing. The globally accepted tolerance is 3 spots.
Advice on not blocking vents or exposing the LCD display to direct sunlight, heat, dust, or vibration.
Instructions for using the correct power cord, connecting to a source, and when to disconnect.
Cleaning the display with a soft cloth and mild detergent, avoiding solvents and sharp objects.
Steps to connect the display to a PC using a VGA cable, adaptor, and power cord.
Steps to connect the display to a PC using a DVI cable, adaptor, and power cord.
Guide on navigating and selecting features within the On-Screen Display (OSD) menu.
Explains common warning messages like "NO SIGNAL INPUT" and their resolutions.
Checks for power, adaptor, and cord connection issues when the display is off.
Checks PC standby mode, signal cable, and PC/source status when the LED is amber.
To Next Page
General
