What to do if AG Neovo RX-22 has no picture and LED is off?
First, ensure the AG Neovo LCD display is turned on. Then, verify that the power cord is correctly connected to the LCD display and plugged into the power outlet.
What to do if AG Neovo RX-22 has no audio output?
First, check if the volume is set to 0. Next, ensure that AUDIO is not set to OFF. Also, for VGA or DVI input, verify the audio setting of the computer.
Why is AG Neovo Monitor LED indicator AMBER?
Check if the computer is turned ON. If the computer is in standby mode, move the mouse or press any key to wake it up.
What to do if AG Neovo RX-22 displays blurry texts?
If you are using VGA input, touch the keypad to auto-adjust the AG Neovo Monitor display. Alternatively, adjust the IMAGE SETTING.
What to do if AG Neovo Monitor OSD menu can’t be called out?
The OSD might be locked. Unlock the OSD of your AG Neovo Monitor.
What to do if AG Neovo RX-22 Monitor image position is incorrect?
Adjust the H. POSITION and V. POSITION values in the image settings of your AG Neovo Monitor.
Why can't I adjust Backlight setting on AG Neovo Monitor?
The AUTO BRIGHTNESS setting is likely ON. Disable AUTO BRIGHTNESS on your AG Neovo Monitor.
What to do if AG Neovo Monitor PIP mode does not work?
The main and sub input source signals may not be compatible to be displayed together in PIP mode.
Why does dew form on or inside AG Neovo RX-22 LCD display?
This usually occurs when the AG Neovo LCD display is moved from a cold to a hot room. Do not turn on the LCD display. Wait for the dew condensation to disappear.
Why do red, blue, green, white dots appear on AG Neovo RX-22 Monitor screen?
The AG Neovo LCD display contains millions of micro transistors. It is normal for a few to be damaged and produce spots. This is acceptable and not considered a failure.
General| Resolution | 1920 x 1080 |
|---|---|
| Brightness | 250 cd/m² |
| Response Time | 3 ms |
| Aspect Ratio | 16:9 |
| Screen Size | 21.5 inches |
| Panel Type | LED-Backlit LCD |
| Contrast Ratio | 1000:1 |
| Connectivity | VGA, DVI, HDMI |
| Viewing Angle | 170° (H) / 160° (V) |
Regulatory compliance statement for FCC Class-B digital device.
Precautions to take during the initial setup of the display.
Safety guidelines for operating the LCD display.
Steps for preparing the display for wall mounting.
Guide to connecting various input sources like VGA, DVI, HDMI.
How to choose between different input signals.
How to automatically tune display settings for optimal image.
How to adjust the screen's brightness level.
Options for adjusting color temperature and settings.
Configuring Picture-in-Picture modes and sources.
Helps diagnose and solve common problems with the display.
To Next Page
