AG Neovo RX-32E User Manual (English)

Questions and Answers:

T
Tracy WilliamsAug 15, 2025
Why can I see the picture but there is no sound on my AG Neovo Monitor?
- E
  estradarobertAug 15, 2025
  If you can see the picture but cannot hear any sound on your AG Neovo Monitor, there might be several reasons: * The source signal cable may not be connected properly, so ensure that both video and sound inputs are correctly connected. * The volume might be turned all the way down. Try pressing the volume up button to increase the sound. * The MUTE function could be activated. Deactivate it using the MUTE button. * External speakers might not be connected. Connect external speakers and adjust the volume to a suitable level.
H
Heather BakerAug 18, 2025
How to troubleshoot no picture on AG Neovo RX-32E?
- A
  Alexander AllenAug 18, 2025
  If no picture is displayed on your AG Neovo Monitor, here are a few things to check: * Ensure that the main power switch on the back of the display is switched on and plug in the power cord. * Verify that the selected input has a connection by connecting a signal connection to the display. * Confirm that the display is not in standby mode by ensuring the power switch is switched on.
J
Jeffrey ChoiAug 21, 2025
What to do if I can hear sound but there is no picture on my AG Neovo Monitor?
- A
  Annette DavisAug 21, 2025
  If you can hear sound but there's no picture on your AG Neovo monitor, it might be due to an improperly connected source signal cable. Ensure that both video and sound inputs are correctly connected.
L
Lisa RodriguezAug 25, 2025
Why is the picture distorted on my AG Neovo RX-32E Monitor?
- B
  Brandon Leon DVMAug 25, 2025
  If the picture on your AG Neovo monitor appears distorted with abnormal patterns, it could be due to: * The signal cable not being connected properly. Ensure the signal cable is firmly attached. * The input signal exceeding the display's capabilities. Check the video signal source to ensure it's within the display's range, verifying against the display's specifications.
H
Hannah RamirezAug 28, 2025
Why is the color abnormal on my AG Neovo RX-32E Monitor?
- E
  Edwin SmithAug 28, 2025
  If the color on your AG Neovo monitor appears abnormal, it is possible that the signal cable is not connected properly. Make sure that the signal cable is firmly attached to the back of the display.
G
George Morse DVMAug 31, 2025
How to reduce interference on AG Neovo RX-32E Monitor?
- A
  Adam WilliamsAug 31, 2025
  If you are experiencing interference or audible noise on your AG Neovo display, it may be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
C
Courtney SmithSep 3, 2025
How do I adjust the screen size on my AG Neovo RX-32E?
- R
  Rhonda DoughertySep 4, 2025
  If the display image doesn’t fill up the full size of the screen on your AG Neovo monitor, the picture format is not set correctly. Press the button and select Wide Screen.
M
Mr. Gregory Deleon IIISep 7, 2025
What to do if some pixels don't light up on my AG Neovo Monitor?
- J
  Jorge HunterSep 7, 2025
  This display is manufactured using an extremely high level of precision technology; however, sometimes some pixels of the display may not display. This is not a malfunction.
N
nicole68Sep 10, 2025
How to prevent after-images on AG Neovo Monitor?
- K
  Kristin LiSep 12, 2025
  To prevent after-images on your AG Neovo monitor, avoid displaying a still picture for an extended period of time, as this can cause a permanent after-image to remain on the display.

AG Neovo RX-32E Specifications

General

Screen Size	32 inches
Resolution	1920 x 1080
Panel Type	VA
Response Time	8 ms
Viewing Angle	178°/178°
Aspect Ratio	16:9
Contrast Ratio	3000:1
Connectivity	HDMI, VGA