What to do if my AG Neovo MD-2402 has no picture and the LED is off?
If your AG Neovo monitor shows no picture and the LED indicator is OFF, ensure that the LCD monitor is turned ON. Also, verify that the power cord is properly connected to the LCD monitor and plugged into the power outlet.
Why is the LED indicator on my AG Neovo MD-2402 Monitor blue?
If the LED indicator on your AG Neovo monitor is blue, check if the computer is turned ON. If the computer is in standby mode, move the mouse or press any button to wake it up.
How to fix blurry text on my AG Neovo MD-2402?
If the displayed texts are blurry on your AG Neovo monitor when using VGA input, press and hold the key to auto adjust the screen. Alternatively, adjust the Clock and Phase settings in the Image Setting menu.
How to adjust the image position on my AG Neovo MD-2402 Monitor?
To correct the image position on your AG Neovo monitor when using VGA input, adjust the H. Position and V. Position settings in the Image Setting menu.
Why are there colored dots on my AG Neovo MD-2402 screen?
The appearance of red, blue, green, or white dots on the AG Neovo Monitor screen is normal. LCD monitors contain millions of micro transistors, and it's common for a few to be damaged, resulting in these spots. This is acceptable and not considered a failure.
What to do if faint shadows appear on my AG Neovo Monitor?
If you notice faint shadows from a static image appearing on your AG Neovo monitor screen: * Turn off the LCD monitor for extended periods of time. * Use a screen saver or a black and white image and run it for extended periods of time.
What to do if dew forms on my AG Neovo MD-2402?
If dew has formed on your AG Neovo LCD monitor, which typically happens when moving it from a cold to a hot room, do not turn on the LCD monitor. Wait for the dew condensation to disappear before use.
Why is there no audio output from my AG Neovo Monitor?
Audio output is not supported on this AG Neovo monitor.
To Next Page
General
