What to do if my AG Neovo Monitor has no picture and the LED is off?
If your AG Neovo monitor shows no picture and the LED indicator is off, try the following: * Ensure the monitor is turned on. * Verify the power cord is properly connected to the monitor. * Confirm the power cord is plugged into the power outlet.
What to do if my AG Neovo Monitor LED indicator is blinking blue?
If the LED indicator on your AG Neovo monitor is blinking blue, it may indicate that the computer is in standby mode or turned off. You can try the following: * Check if the computer is turned on. * If the computer is in standby mode, move the mouse or press any key to wake it up.
How to fix faint shadows from static images on AG Neovo Monitor screen?
If you notice faint shadows from a static image appearing on your AG Neovo monitor screen, here are a few things you can try: * Turn off the monitor for extended periods when not in use. * Use a screen saver, preferably a black and white image, and run it for extended periods.
Why is there no audio output from my AG Neovo Monitor?
If there is no audio output from your AG Neovo monitor, check the following: * Confirm that the volume is not set to 0. * Check the Audio Volume setting in the Other menu to ensure it is not set to 0.
What to do if dew forms on my AG Neovo ME-2401 Monitor?
If dew has formed on your AG Neovo monitor, this usually happens when the monitor is moved from a cold environment to a warmer one. Do not turn on the monitor. Wait for the dew condensation to disappear before using it.
General| Brightness | 250 cd/m² |
|---|---|
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1000:1 |
| Connectivity | VGA |
To Next Page
