EasyManuals Logo

AGA Mercury User Manual

AGA Mercury
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
21
Location of the Range
The range may be installed in a kitchen/kitchen dining area
but NOT in a room containing a bath or shower.
The range is freestanding and should not be placed on a
separate base.
The range should be positioned on a solid substrate.
n
Your range is heavy DO NOT place on soft oor
coverings, such as cushioned vinyl or carpeting.
Use care when moving the range on cushioned vinyl or
carpeted ooring. It is recommended the following be
followed to protect your oor:
When the oor covering ends at the front of the range, the
area that the range will rest on should be built up to the same
level or higher than the oor covering.
n
IMPORTANT - This will allow the range to be moved
for cleaning or servicing. Also, make sure your oor
covering will withstand 180°F. (See the Installation
Safety Instructions section).
n
IMPORTANT - Make sure the wall coverings around
your range can withstand the heat generated (up
to 200°F) by the range. (See the Installation Safety
Instructions section).
You will need the following equipment to complete the
range installation satisfactorily:
Multimeter (for electrical checks).
Allen keys (provided in pack).
You will also need the following tools:
1. Steel tape measure
2. Cross-head screwdriver
3. Flat head screwdriver
4. Spirit level
5. 9/16 " (13 mm) wrench or socket wrench
6. 5/16 " (8 mm) socket wrench or ring wrench
Additional materials you may need:
1. Gas line shut-o valve.
2. Pipe joint sealant or UL-approved pipe thread tape with
Teon* that resists action of natural and LP gases.
3. Flexible metal appliance connector (½’ I.D.). A 5foot
length is recommended for ease of installation
but other lengths are acceptable. Never use an old
connector when installing a new range.
4. Flare union adapter for connection to gas supply line
(¾’ or ½’ NPT x ½’ I.D.).
5. Flare union adapter for connection to pressure regulator
on range (½’ NPT x ½’ I.D.).
6. To protect any oor covering under the range a sheet of
¼’ thick plywood or equivalent large enough to stand
the range on.
Included Accessories:
6 interlocking cast iron grates Wok Cradle
Broiler pan & trivet Broiler pan cradle
1 drop shelf 2 at shelves
2 telescopic shelves 2 Oven Base Trays

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AGA Mercury and is the answer not in the manual?

AGA Mercury Specifications

General IconGeneral
BrandAGA
ModelMercury
CategoryRanges
LanguageEnglish

Related product manuals