DX-D 100 Mobile X-ray Unit
User Manual
0188K EN 20201116
75
5.1.3 CLEANING AND DISINFECTION
NEVER ATTEMPT TO C LEAN ANY PART OF THE UNIT WHEN
IT IS SWITCHED ON.
Clean the equipment frequently, particularly if corroding chemicals are present.
Clean external covers and surfaces, especially parts which might be in contact
with patients, with a cloth moistened in warm water with mild soap. Wipe with
a c loth moistened in clean water.
When it is needed to disinfect the Control Console, clean it with a cloth
impregnated with isopropyl alcohol.
DO NOT APPLY DIRECTLY ANY LIQUID ON THE SCREEN OR
OTHER SURFACES, NOR USE CLEANERS CONTAINING
BLEACH, AMMONIA OR ANY OTHER ABRASIVE OR
SOLVENT LIQUID, IT COULD CAUSE DAMAGE TO THE
EQUIPMENT.
5.2 SERVICE TASKS
Only service personnel specifically trained on this medical X-ray equipment
should work on service tasks (installation, calibration or maintenance) of the
equipment (refer to the respective Sections of the Service Manual provided with
this equipment).
To Next Page
Loading...
