- 24 -
Using the Macro mode
Your camera is equipped with a macro function that allows you to focus on very close
subjects. In macro mode you can focus on subjects 5 cm from the lens when in the maximum
wide angle (zoomed out) setting and 25 cm in the maximum telephoto (zoomed in) setting.
1. Set the camera to the Record mode
You can use the macro mode in still
image shooting or movie recording.
2. Press the
button to enter the macro
mode.
The macro mode icon (
) appears
on the LCD monitor.
3. To leave the macro mode, press the
button again.
NOTE:
Distances referred to measure the distance between the camera lens surface and the
subject.
To Next Page
Loading...
