Agilent Technologies 1290 Infinity II Technical Note

37
Install the Seal Wash Function (Quaternary Pump)
Secondary Pump Head Parts
7 Install tubing connections to the pump head.
Next Steps:
8 Install the top cover and put the module to the stack including
tubing, capillary and cable connections.
9 Route the inlet of the wash tubings into a bottle filled with a
mixture of distilled water and isopropanol (90/10) and place
the bottle in the solvent cabinet. Route the outlet of the wash
tube to the waste container.

Agilent Technologies 1290 Infinity II Specifications

General

Brand	Agilent Technologies
Model	1290 Infinity II
Category	Laboratory Equipment
Language	English