What’s New in Data Acquisition
2 Agilent 6400 Series Triple Quadrupole LC/MS Quick Start Guide
The Agilent 6495, 6490 and 6460 Triple Quad LC/MS are shipped by default with
the Agilent Jet Stream Technology that utilizes a super-heated sheath gas to
collimate the nebulizer spray which dramatically increases the number of ions that
enter the mass spectrometer.
You can set up an Agilent Triple Quad LC/MS with the Agilent 1100, 1200, 1260 or
1290 Infinity LC modules.
Also, the Agilent Triple Quad LC/MS comes with Agilent MassHunter Workstation
Software that includes three major programs:
• Data Acquisition – From one screen you can tune the mass spectrometer,
control and monitor instrument parameters, set up acquisition methods and
worklists containing multiple samples and monitor real-time run plots.
• Quantitative Analysis – From one screen you can set up a batch of data files and
quantify, evaluate and requantify the results. From this screen you have access
to the Method Editor for setting up and editing the quantitation methods.
• Qualitative Analysis – From one screen you can extract and integrate
chromatograms, subtract background, extract peak spectra, and compare data
from different types of data files.
What’s New in Data Acquisition
The Data Acquisition program for the 6400 Series Triple Quadrupole has many
new features in this revision.
in B.07.00
• The supported models are 6420A, 6430A, 6460A, 6460C, 6490A, and 6495A.
• The supported LC models are 1100, 1200, 1260, 1290, HTS, and HTC.
• You can autotune the 6495 with the Agilent Jet Stream.
• Autotune is faster for the 6490 and the 6495 than in previous versions.
• The 6495 supports Unit, Wide, and Widest resolutions.
• Fast scan autotune is not supported for the 6495.
• Optimizer allows you to set the injection volume for a compound.
• Optimizer allows you to set the number of transitions to find during
optimization.
• Optimizer allows you to open a different database from the File menu in
Optimizer.
To Next Page
Loading...
Need help?
General
