7890 Series GC Installation Checklist
Issued: 09-Feb-2013, Revision: 1.7 Copyright
2011 Agilent Technologies
Thank you for purchasing an Agilent Instrument solution. This checklist is used by the installing
engineer to ensure that the instrument and associated systems are correctly installed, upgraded and
functioning as designed in your facility. This checklist will be completed at the end of the service and
provided to you as a record of the installation.
Customer Information
• Customers should provide all necessary operating supplies upon request of the engineer.
Service Engineer’s Responsibilities
• Only complete/printout pages that relate to the system being installed.
• Complete empty fields with the relevant information
• Complete the relevant checkboxes in the checklist using a “X” or tick mark “” in the checkbox.
• Complete Not Applicable check boxes to indicate services not delivered, as needed
• Complete the Service Review section together with the customer.
Additional Instruction Notes
• There are separate checklists similar to this one for each major system component installed with the
GC. Make sure that all checklists for the system are available prior to beginning the installation.
• Refer to the " Installation and First Startup " Manual from "GC and GC/MS User Manuals and
Tools" before proceeding with this procedure.
• GC, ALS, MSD and accessory user manuals, the GC Firmware/PID Update Tool, Parts Finder and
other tools are included on the " GC and GC/MS User Manuals and Tools" DVD set. These will be
installed as part of this GC Installation Procedure.
• Refer to the following 7890B User Manuals as you go through this checklist procedure.
Installation and First Startup -
http://www.chem.agilent.com/Library/usermanuals/Public/7890B_Installation.pdf
Operation Manual -
http://www.chem.agilent.com/Library/usermanuals/Public/7890B_Operation.pdf
Maintaining Your GC -
http://www.chem.agilent.com/Library/usermanuals/Public/7890B_Maintaining.pdf
These, and the complete set of 7890 Manuals are available on the Agilent Technical Support Site at:
http://www.chem.agilent.com/en-US/Technical-Support/Instruments-Systems/Gas-
Chromatography/Pages/default.aspx
To Next Page
Need help?
General
