Agilent Technologies 81150A User Manual

Getting Started
Setting the Trail
Edge
 Press the More softkey or use the navigation key to set the value of
Trail Edge.
 Set the value of Trail Edge to 50%.
 Press the Trail Edge softkey again to choose a different unit for
different requirements.
Setting the
Amplitude
 Press the Ampl softkey or use the navigation key to set the
Amplitude. Set the amplitude to 3Vpp.
Setting the Offset
 The Offset is set to 0 VDC by default; therefore there is no need to
change it.

Agilent Technologies 81150A Specifications

General

Brand	Agilent Technologies
Model	81150A
Category	Pulse Generator
Language	English