Chapter 1 1-3
Installing Your Analyzer
STEP 1. Verify the Shipment
STEP 1. Verify the Shipment
NOTE If your analyzer was damaged during shipment, contact your nearest Agilent
Technologies office or sales representative. A list of Agilent Technologies sales and
service offices is provided in Table 2-1 on page 2-27.
ES models only: the PORT 1 and PORT 2 connectors move. This is NOT a
defect.
1. Unpack the contents of all the shipping containers. WARNING: The analyzer weighs
approximately 46 pounds (21 kilograms). Use correct lifting techniques.
2. Carefully inspect the analyzer to ensure that it was not damaged during shipment.
To Next Page
Loading...
Need help?
General
