Agilent Technologies 8960 Series

18
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Proguide\Chapters\prog_prog_guide_step1.fm
Step 1: Set the Test Set’s Operating Mode to Active Cell
Setting the Test Set’s Operating Mode to Active Cell
The test set’s operating mode is set using the CALL:OPERating:MODE command.
Example 1. Command Syntax:
CALL:OPERating:MODE <CELL|TEST>
Example 2. Programming Example:
!**********************************************************************
! Step 1: Set Test Set Operating Mode To Active Cell
!**********************************************************************
!
OUTPUT Test_set;”CALL:OPER:MODE CELL