Agilent Technologies 8960 Series - Measuring Bit Error Ratio

40
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Proguide\Chapters\prog_prog_guide_step4.fm
Step 4: Establish an Active Link with Mobile Station
Step 4: Figure 2. Process For Making A Mobile Station Originated Call
Yes
No
Start
Originate a call from
mobile station.
Enter response from
call connected state
query.
Call connected?
Proceed with control
program.
Send CALL:END
command.
Invoke error
handler.
Send call connected
state query command.
Arm call state change
detector.
Set call state change
detector time-out time.