Agilent Technologies 8960 Series - Page 60

60
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Proguide\Chapters\prog_prog_guide_step8.fm
Step 8: Disconnect the Mobile Station from the BSE
Step 8: Figure 2. Process for Terminating an Active Call from the Mobile Station
No
Yes
Proceed with control
program.
Invoke error
handler.
Start
Set call state change
detector time-out
time.
Send call connected
state query
command.
Arm call state
change detector.
Terminate the call
from mobile station.
Enter response from
call connected state
query.
Call connected?