Agilent Technologies AA Series - Page 36

Introduction
36 Agilent 240/280 Series AA User’s Guide
Fuses
Non-Zeeman
240 series AA
T2.5 A H250 V, IEC 127 sheet 5, 5 x 20 mm (100-120 & 220-240 VAC)
280FS AA
T4 A H250 V, IEC 127 sheet 5, 5 x 20 mm (100-120 & 220-240 VAC)
Zeeman
240Z/280Z AA
15 A long delayed-action circuit breaker with a thermal cutout.
T3.15 A H 250 V, IEC 127 sheet 5, 5 x 20 mm (208-240 VAC)
T3.15 mA L 250 V, IEC 127 sheet 2, 5 x 20 mm (208-240 VAC)
T1 A L 250 V, IEC 127 sheet 2, 5 x 20 mm (208-240 VAC)
T8 A L 250 V, IEC 127 sheet 2, 5 x 20 mm (208-240 VAC)
T800 mA L 250 V, IEC 127 sheet 2, 5 x 20 mm (208-240 VAC)
NOTE
For safety reasons, any other internal fuse or circuit breaker is not operator
accessible, and should be replaced only by Agilent field service engineers.
Fuse information on the rear of the instrument is the most up to
date.