Installation
58 Agilent 240/280 Series AA User’s Guide
Driver Installation
To install the drivers:
1 Ensure the SpectrAA software has been installed and the
computer has been restarted. Do not open the SpectrAA software
and do not connect the camera.
2 Insert the Logitech Quickcam CD-ROM into your CD-ROM drive.
3 Navigate to the installation CD and double-click ‘Setup.exe’.
4 Select your preferred language in the ‘Preferred Language’ dialog
box on the ‘Welcome’ screen and then click Next.
5 Ensuring that the camera is not connected, (contrary to screen
instructions) click Next.
6 Select Custom Install and then click Next on the ‘Choose Set-up’
screen.
7 On the ‘Install Webcam Software’ screen (see Figure 2):
a Select ‘Logitech Webcam Software’.
b Deselect ‘Logitech Motion Detection’.
c Deselect ‘Logitech Video Effects’.
d Select ‘Logitech Webcam Drivers’.
e Deselect ‘Logitech Vid-HD’.
f Click Next.
To Next Page
Loading...
