Installation
Agilent 240/280 Series AA User’s Guide 59
Figure 2. Logitech Webcam Drivers installation window
8 If an ‘Update’ screen is displayed, click Next.
The ‘Installing Software’ screen will be displayed.
9 After the installation has completed the ‘Check Settings’ screen
will be displayed. Click Next.
10 The software is now installed. Click Checkout my webcam.
The Logitech Webcam Software will be displayed.
11 Plug in the Logitech Webcam into the USB port on the
spectrometer.
If installation is successful an image of a Logitech Webcam
camera will be displayed on the software window.
12 Select Quick capture and then Controls.
The image from the Tube-CAM video is not currently displayed in
the ‘Webcam Control’ window because the hollow cathode lamps
are not yet illuminated.
To Next Page
Loading...
