Installation
46 Agilent 240/280 Series AA User’s Guide
9 The SpectrAA Instrument Configuration window will be
displayed again. Check that the selections are correct and click
OK. Take note of which instrument is listed in ‘Instrument #2’ if
running an Agilent AA-DUO system.
10 During installation, you will be asked whether or not to delete
the files ‘Workgrp.ini’ and ‘User.ini’. These are created if you
opened the SpectrAA software after installing SpectrAA Base but
before installing SpectrAA PRO. Select ‘Delete this file’
(recommended) for both dialog boxes.
11 Click ‘Yes’ to install the SpectrAA Help if you skipped that step
during the SpectrAA Base installation or ‘No’ to cancel the Help
installation if it has already been completed.
12 Once the software installation is complete, restart your
computer.
To Next Page
Loading...
