Agilent Technologies Cary 600 Series User Manual

Safety Practices and Hazards
12 Agilent Cary 600 Series FTIR Spectrometers and Microscopes User’s Guide
Labeling
Laser safety labels are located on the rear of the Agilent Cary 600
Series FTIR spectrometer and underneath the top cover.
Figure 1. Laser safety label locations on the rear of the Agilent Cary 600 Series
FTIR spectrometer
The laser safety warning just above the Purge and Air Bearing
connections states ‘Laser radiation. Do not stare into beam. Class 2
laser product. (IEC 60825-1/2007). Max. output: 1 mW/600-700 nm. If
the spectrometer is purchased where a local language is supported,
the localized warning will be present next to, or near, the English
version.
Under top cover
The following image shows the laser safety warning located on the
top of, and underneath, the interferometer compartment cover.

Agilent Technologies Cary 600 Series Specifications

General

Brand	Agilent Technologies
Model	Cary 600 Series
Category	Microscope
Language	English