Agilent Technologies Cary 600 Series User Manual

Safety Practices and Hazards
14 Agilent Cary 600 Series FTIR Spectrometers and Microscopes User’s Guide
Laser aperture locations
WARNING
Laser Hazard
Avoid exposure – laser light may be emitted from this aperture. The laser
light could cause retinal (eye) damage if prolonged direct viewing occurs.
This is a Class 2 laser product. It is not powerful enough to harm your skin
should your hand intercept it.
The optical design of the 600 Series spectrometer and the 610 FTIR
microscope normally precludes this. Always wear appropriate safety
equipment and clothing.
Figure 4. Laser aperture locations on the spectrometer (indicated by the circles
on the image) and microscope
Other precautions
Infrared sources operate at high temperatures, which may burn you.
Before replacing a source element that has been lit, switch off the
instrument and ensure that the source has adequately cooled.
Aperture located directly
on the opposite side of the
microscope from the laser
signal input from the
spectrometer.
Laser signal input from
the spectrometer

Agilent Technologies Cary 600 Series Specifications

General

Brand	Agilent Technologies
Model	Cary 600 Series
Category	Microscope
Language	English