EasyManuals Logo
Home>Agilent Technologies>Measuring Instruments>E4404B

Agilent Technologies E4404B Getting Started Guide

Agilent Technologies E4404B
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
80 Chapter 5
Options and Accessories
Options
229 Modulation Analysis
Personality
Adds demodulation and analysis of the following base-band
modulation formats.
•QPSK
Offset QPSK
pi/4 dQPSK
QAM 16, 32, 64, 128, and 256
GMSK (GSM standard compliant only)
8 FSK (EDGE standard compliant only)
This option also includes the ability to connect the analyzer to a
Windows NT 4.0 or Win2000 based PC running Agilent 89600
VSA software. The Agilent 89600 VSA software is not included
with this option, it is available separately.
219 Noise Figure Measurement
Personality and Hardware
Provides noise figure measurements including:
Limit lines
Loss compensation
Extended frequency (measures up/down converters)
To have specified performance below 3 GHz, you need the
preamp Option 1DS.
226 Phase Noise Measurement
Personality
Option 226 is an automated phase noise (dBc/Hz) measurement
solution. It provides the ability to measure SSB noise, RMS
noise, DANL, as well as the real-time generation of a phase noise
vs. log offset frequency, and phase noise vs. time.
High Stability Frequency Reference (Option 1D5) is
recommended. Narrow resolution bandwidth (Option 1DR) is
highly recommended. Without Option 1DR, the minimum offset
frequency will be 10 kHz.
266 HP 8566B/8568B
Programming Code
Compatibility
Option 266 allows use of a limited set of 8566B/8568B
programming commands to control the ESA Series
analyzers. When this option is enabled, SCPI commands
are disabled if the remote language selected is not SCPI.
290 8590 Series Programming
Code Compatibility
Option 290 allows use of a limited set of 8590 Series
programming commands to control the ESA Series
analyzers. When this option is installed on an ESA
analyzer, remote programming using SCPI commands is
not possible. This option must be uninstalled to restore
SCPI programming functionality.
231 ESA to 89600 Series
Software Link Utility
Option 231 adds connectivity of an ESA analyzer to a Windows
NT 4.0 or Windows 2000 based PC running Agilent 89600 VSA
software. The Agilent 89600 VSA software is not included with
this option. It is available separately.
Option
Number
Name Description

Table of Contents

Other manuals for Agilent Technologies E4404B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Agilent Technologies E4404B and is the answer not in the manual?

Agilent Technologies E4404B Specifications

General IconGeneral
BrandAgilent Technologies
ModelE4404B
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals