Chapter 2 131
Instrument Functions: A - L
File
Instrument Functions: A - L
2.6.3.4.3 Trace 3
Selects trace 3 for the trace data to be loaded into.
Key Path:
File, Load, Destination
State Saved: Not saved in Instrument State.
Factory Preset: Not affected by
Preset. Power up and Restore Sys Defaults sets Trace 1.
2.6.3.5 Dir Up
Moves up one subdirectory level within a directory. If your position is in the top level of the
drive already, it moves up to the drive level and the current drive is highlighted (A: or C:).
Key Path:
File, Load
State Saved: Not saved in Instrument State.
Factory Preset: Trace file format, is All Traces at power on.
2.6.3.6 Dir Select
Displays the highlighted directory.
See “Dir Select” on page 120 for more information.
Key Path:
File, Load
State Saved: Not saved in Instrument State.
Factory Preset: Trace file format, is All Traces at power on.
To Next Page
Loading...
