Chapter 4 273
Instrument Functions: P - Z
System
Instrument Functions: P - Z
4.9.12.6 Install an Application Mode (Remote command only)
Installs the specified application from an external drive to the instrument. Each
application allows you to make a specific set of measurements easily and accurately.
Installation requires a 12-character license key that you received with your application.
The license key number is unique to the option and instrument serial number. If it cannot
be located, contact your local Agilent Technologies and service office to re-obtain the
information. (Have the instrument model number, host ID, serial number available.)
Remote Command:
See also *OPT?
Example: *OPT? returns a string with all the application options currently installed
in the instrument (e.g. “B7J,202,204,BAC”).
4.9.13 Personality
Pressing Personality displays information about the personalities installed and their license
status, as shown in the following illustration.
Key Path: System
Annunciation/
Annotation: Text Screen
Dependencies/
Couplings: The active function is disabled.
SCPI Status Bits/
OPC Dependencies: None
Factory Preset: Off
To Next Page
Loading...
