280 Chapter 4
Instrument Functions: P - Z
Trace/View
Instrument Functions: P - Z
4.10.6 View
Holds and displays the amplitude data of the selected trace. The trace is not updated as
the analyzer sweeps.
Key Path:
Trace/View, Trace
History: Added with firmware revision A.02.00
Remote Command:
See “Trace/View” on page 277.
Example: TRAC:MODE VIEW
4.10.7 Blank
Stores the amplitude data for the selected trace and removes it from the display. The
selected trace register will not be updated as the analyzer sweeps.
Key Path:
Trace/View
History: Added with firmware revision A.02.00
Remote Command:
See “Trace/View” on page 277.
Example: TRAC:MODE BLAN
To Next Page
Loading...
