Chapter 4 229
Instrument Functions: P - Z
SPAN / X Scale
Instrument Functions: P - Z
Remote Command:
See[:SENSe]:FREQuency:SPAN 0 Hz
Example: FREQ:SPAN 0 Hz
4.7.5 Last Span
Changes the displayed frequency span to the previous span setting. If it is pressed
immediately after
Signal Trackor Span Zoom is turned off, then span setting returns to the
span that was in effect before these function were turned on.
Key Path:
SPAN X Scale
Remote Command:
[:SENSe]:FREQuency:SPAN:PREVious
Example: FREQ:SPAN:PREV
To Next Page
Loading...
