Agilent Technologies E5071C Configuration Guide

3
1. Options are ordered using the combined model/option number, e.g. E5071C-240.
2. Order the 82357B USB/GPIB interface at the same time if you want to control power meters with the E5071C. This will
allow you to conduct scalar mixer calibrations (SMC), power calibrations, or receiver calibrations after power calibrations.
3. When using an ECal module with the MWA calibration wizard, a 4-port ECal module (i.e. N4431B, N4433A) is required.
E5071C ENA Network Analyzer
Options
To add options to a product, order the corresponding item number.
Option
1
Description Additional information
Test set
Option 240
Option 440
Option 245
Option 445
Option 280
Option 480
Option 285
Option 485
Option 2K5
Option 4K5
2-port test set, 9 kHz to 4.5 GHz without bias tees
4-port test set, 9 kHz to 4.5 GHz without bias tees
2-port test set, 100 kHz to 4.5 GHz with bias tees
4-port test set, 100 kHz to 4.5 GHz with bias tees
2-port test set, 9 kHz to 8.5 GHz without bias tees
4-port test set, 9 kHz to 8.5 GHz without bias tees
2-port test set, 100 kHz to 8.5 GHz with bias tees
4-port test set, 100 kHz to 8.5 GHz with bias tees
2-port test set, 300 kHz to 20 GHz with bias tees
4-port test set, 300 kHz to 20 GHz with bias tees
Time base
Option UNQ
Option 1E5
Standard stability time base
High stability time base Adds a higher stability time base reference.
Hard disk drive
Option 017
Option 019
Removable hard disk drive
Standard hard disk drive
Additional features
Option 008
2
Option 010
Option 790
3
Frequency offset mode
Time domain analysis
Measurement wizard assistant software
Adds frequency-offset sweep and harmonic
measurement capabilities.
Adds time domain transform and gating
capabilities.
Adds Measurement Wizard Assistant (MWA)
software to simplify your multiport measure-
ments.
Accessories
Option 1CM
Option 1CN
Option 1CP
Option 810
Option 820
Rack mount kit
Front handle kit
Rack mount and front handle kit
Add keyboard
Add mouse
Calibration documentation
Option 1A7
Option A6J
ISO 17025 compliant calibration
ANSI Z540 compliant calibration

Agilent Technologies E5071C Specifications

General

Brand	Agilent Technologies
Model	E5071C
Category	Measuring Instruments
Language	English