174 Chapter 2
Front-Panel Key Reference
Print
Print
The standard I/O Option A4H (GPIB and Parallel) or Option 1AX
(RS-232 and Parallel) only. Print initiates an output of the display data
or report, without an external controller, to a previously specified
graphics printer.
Refer to “Printer Setup and Operation” in your Getting
Started or Programmer’s Guide for detailed information about printing.
Press the
Print key to immediately print the screen or report to the
currently-defined printer. The screen remains frozen (no further sweeps
are taken) until the data transfer to the printer is complete. Refer to the
Print Setup key description in this chapter for more information about
the structure and definitions of the printer keys.
If you need to abort a print in progress, use the
ESC (escape) key.
NOTE Printing requires an I/O interface. The Agilent EMC Analyzers
Programmer’s Guide, included with the optional interfaces, provides
interface details. Refer to “Printer Setup and Operation” in the Agilent
EMC Analyzers Getting Started Guide for more information about
printing.
To Next Page
Loading...
