98 Chapter 2
Front-Panel Key Reference
File
When Type is set to Corrections, Source accesses the
Antenna, Cable, Other and User menu keys, which allow
you to select the type of correction to be saved.
When
Type is set to Limits, Source accesses the Limit 1
and
Limit 2 menu keys. Limit 1 and Limit 2 provide data
sets to determine whether a trace has exceeded preset
specifications. Limit sets can hold up to 200 points and
can only be saved individually.
Key Access:
File, Save
Name Accesses the Alpha Editor and allows you to enter a
filename. The external keyboard can also be used to
enter a filename while the alpha editor is accessed.
Key Access:
File, Save
NOTE Only capital letters (A-Z) and digits (0-9) may appear in file names
(8 characters, maximum). Additionally, file names include a 3 character
extension which is automatically set by the instrument.
Dir Up Allows you to move up one directory level. If at the top
level, Dir Up moves to the drive level, displaying the
available disk drives.
Key Access:
File, Save
Dir Select
Accesses the highlighted directory on your display.
Key Access:
File, Save
Load
Accesses menu keys that allow you to load analyzer setups, states,
traces, limits and corrections into the analyzer from a floppy (A:) drive
or internal flash (C:) drive.
Key Access:
File
Load Now
Executes the load function. When the load is complete,
the message XXXXXX file loaded (where XXXXXX is
the filename) will appear in the status line on your
display.
Key Access:
File, Load
Type
Allows you to select the type of file you want to load.
Setup Displays all setup files you may wish to
load (.SET). Setup files include a
complete set of instrument parameters
including traces, states, limits, and
corrections. Loading a setup restores
the analyzer (as closely as possible) to
all previous instrument settings at the
time of the save.
To Next Page
Loading...
Need help?
General
