280
Safety Information
WARNING Disconnect the instrument from the line and unplug the power cord
before maintenance.
Do not operate the instrument in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes a
definite safety hazard.
Use the instrument only with Agilent CAN connected instrument or with
remote controlled instrument.
Do not install substitute parts or make any unauthorized modification to the
instrument.
Capacitors inside the instrument may still be charged, even though the
instrument has been disconnected from its source of supply. Dangerous
voltages, capable of causing serious personal injury, are present in this
instrument. Use extreme caution when handling, testing and adjusting.
Safety Symbols
Table 67 shows safety symbols used on the instrument and in the manuals.
Table 67 Safety Symbols
Symbol Description
The apparatus is marked with this symbol when the user should refer to the
instruction manual in order to prevent risk of harm to the operator and to
protect the apparatus against damage.
Indicates dangerous voltages.
Indicates a protected conductor terminal.
Eye damage may result from directly viewing the light produced by the Xenon
flash lamp used in this product. Always turn the xenon flash lamp off before
removing it.
!
To Next Page
Loading...
Need help?
General
