35
Installing the G1330B Thermostat
Installing the G1330B Thermostat
Figure 15 Installing the Sample Tray
Half-Tray Combinations
NOTE In the thermostatted autosampler only the 100 vial tray is supported for
temperature control of the vials. Nevertheless the half trays of the standard
autosampler (G1313A) can be used in the thermostatted autosampler as well.
However when these trays are installed cooling or heating of the vials in the
tray will not work.
Half-trays can be installed in any combination enabling both 1.8 ml-and 6 ml-
vials to be used simultaneously.
To Next Page
Loading...