3
Agilent Technologies
Introduction 4
Principles of Operation 6
Display 7
Using the Flow Meter Stand 8
Power/Mode Button 9
Select Button 9
Switching the ADM Flow Meter On and Off 9
Operating Modes 10
Making a Flow Measurement 12
Storing Flow Measurements 13
Reading and Setting a Split Ratio 15
About Flow Measurements 16
Info Mode 17
USB Interface 21
Warning and Error Indications 23
Replacing the Cartridge 24
Replacing Batteries 27
Upgrading the Firmware/Retrieving Certificate of
Calibration 30
A Note About Back Pressure 30
Technical Support 30
Product Specifications 31
To Next Page
Loading...
