4 Agilent ADM Flow Meter Operating Instructions
Introduction
Congratulations on your purchase of the new Agilent ADM Flow Meter! The ADM
Flow Meter has been designed to accurately measure the flow of gases commonly
used in Gas Chromatography without knowledge of the gas type or mixture compo-
sition. A complete ADM Flow Meter consists of a Flow Meter Mainframe and a
Flow Meter Cartridge. The Flow Meter Mainframe contains the display, keypad,
batteries, and microprocessor; while the Flow Meter Cartridge contains all of the
hardware used to make a flow measurement. Flow Meter Cartridges are individu-
ally factory calibrated and can easily be replaced with a new cartridge without
returning the Flow Meter to Agilent. This eliminates the hassle and downtime
associated with maintaining the calibration of an instrument that would normally
need to be sent to an outside facility for calibration on a yearly basis.
To Next Page
Loading...
Need help?
General
