Agilent ADM Flow Meter Operating Instructions 17
Info Mode
Info mode provides details on the flow meter and the installed cartridge. In addi-
tion, Info Mode allows you to set the display brightness and control the Auto off
functionality.
To access Info mode:
• With the unit switched on, repeatedly press the Power/Mode button until Info
mode is displayed.
Once in Info mode, pressing the Select button scrolls through the available Info
mode screens.
Cartridge and flow meter information
To view cartridge and flow meter details:
• With Info mode displayed, press the Select button to cycle through the available
screens.
The first screen displays information about the currently installed cartridge. This
includes the date that the cartridge was first used, and the date that the
cartridge is due to be replaced. In addition, a graphic representation of the
remaining life of the installed cartridge is displayed. (See “Replacing the
Cartridge" on page 24 for details on replacing a cartridge.)
The second screen displays the cartridge serial number (SN) and Key number.
The Key number is used to access the online copy of the cartridge's calibration
certificate. (See “Upgrading the Firmware/Retrieving Certificate of
Calibration" on page 30 for details on retrieving a digital copy of the Certificate
of Calibration for your cartridge.)
To Next Page
Loading...
Need help?
General
