Agilent ADM Flow Meter Operating Instructions 21
USB Interface
Power can be supplied via the micro USB port located on the side of the unit.
The ADM Flow Meter can communicate with a connected PC via the USB port.
Data from your flow meter can be collected by connecting the USB port to your
computer with the included USB cable. The ADM Flow Meter USB driver will be
needed for the instrument to communicate with your PC. For details, please visit
http://www.agilent.com/chem/ADMflowmeter to download the driver and view
the Connecting your Flow Meter to your PC instrument sheet.
NOTE
Using the USB port to supply power does not recharge the
installed batteries.
USB port
To Next Page
Loading...
Need help?
General
