Need help?Do you have a question about the Agilent Technologies G6691A and is the answer not in the manual?
General| Brand | Agilent Technologies |
|---|---|
| Model | G6691A |
| Category | Measuring Instruments |
| Language | English |
Disclaims warranties, limits liability, and outlines technology license terms for the manual.
Details CAUTION and WARNING notices regarding hazards and safe operating procedures.
Measurement calibration can be affected by temperatures above 50 °C; inspect shipment temperature labels.
Used to switch the ADM Flow Meter on/off and scroll through operational modes.
Used to access additional functionality like storing measurements and changing settings.
Instructions for turning the ADM Flow Meter on and off.
Default mode on power up, displays volumetric flow rate in mL/min.
Displays flow rate in sccm, corrected for ambient pressure and temperature.
Allows storing a reference value and comparing subsequent measurements as a ratio.
Ensure flow is within range, note stabilization times, and connect to source after powering on.
Accurate column flow rates require detector gases to be turned off.
Adjust the screen brightness to high or low settings.
Disable the auto-off feature to keep the unit operating continuously.
Instructions on upgrading firmware and retrieving calibration certificates via USB.
Discusses how back pressure from tubing can affect flow measurement accuracy.
Contact information and resources for Agilent Technical Support specialists.
To Next Page