Agilent Technologies N6705

3 Using the Source Functions
92 Model N6705 User’s Guide
Sine Parameters
Parameter: Description:
Amplitude (I
0
or V
0
)
Offset (I
1
or V
1
)
Frequency (f)
The amplitude or peak value.
The offset from zero.
For power modules that cannot generate
negative voltages or currents, the offset
cannot be less than the amplitude.
The frequency of the sine wave.
From the remote interface:
The amplitude or peak value:
ARB:CURR:SIN:AMPL 1,(@1)
ARB:VOLT:SIN:AMPL 5,(@1)
The offset from zero:
ARB:CURR:SIN:OFFS 1,(@1)
ARB:VOLT:SIN:OFFS 5,(@1)
The frequency of the sine wave:
ARB:CURR:SIN:FREQ 1,(@1)
ARB:VOLT:SIN:FREQ 1,(@1)