Agilent Technologies NPD User Manual

Installing the nutwarmer cup (adaptable NPD)
19
Installing the nutwarmer cup (adaptable NPD)
1. Install the insulation in the cup.
2. Push the wire spring lever at the bottom of the cup to the right to
uncover the hole.
3. From inside the oven, place the cup over the detector fitting so that the
top of the cup touches the top of the oven.
4. Release the spring. Make certain the spring fits in the groove of the
detector fitting.

Agilent Technologies NPD Specifications

General

Brand	Agilent Technologies
Model	NPD
Category	Security Sensors
Language	English