Performing Resistance, Conductance and Testing Continuity
Measurements
Performing Capacitance and Temperature Measurements
1 Set the rotary switch to
.
2 Connect the red and black
test leads to input
terminals Ω(Red) and
COM(black) respectively.
3 Probe the test points (by
shunting the resistor) and
read the display.
4 Press to scroll
through audible
continuity, conductance
and resistance tests as
shown.
Audible
Continuity
1 Set the rotary switch to
.
2 Connect the red and black
test leads to input
terminals (red) and
COM(black) respectively.
3 Use the red probe lead on
the positive terminal of the
capacitor while the black
probe lead on the negative
terminal.
4 Read the display.
Capacitance
1 Turn the rotary switch to
position. Press to
select temperature
measurement.
2 Plug the thermocouple
adapter (with the
thermocouple probe connected
to it) into input terminals
TEMP(red) and COM(black).
3 Touch the measurement
surface with the thermocouple
probe.
4 Read the display.
Temperature
U1251A and U1252A Quick Start Guide
To Next Page
Loading...
